Testseek.es han recogido 25 las revisiones expertas de el Ultimaker 2 y el grado medio es el 79%. Enrolle abajo y vea todas las revisiones para Ultimaker 2.
February 2015
(79%)
25 Críticas
Puntuación media de los expertos que han realizado una crítica del producto.
Usuarios
(68%)
9 Críticas
Puntuación media de los propietarios del producto.
79010025
Críticas
página 1 de 3
Ordenar por:
Puntuación
Publicación: 2016-02-05, Autor: Eric , crítica de: uk.hardware.info
The printers which we tested ranged from around 400 Euros to 2500 Euros, so it's not really fair to compare them to one another. Starting with the cheapest printer which we tested, the XYZPrinting da Vinci Junior 1.0: this is certainly a great little ma...
¿Le ha sido de ayuda esta crítica?
-
Publicación: 2015-12-11, Autor: Alastair , crítica de: techradar.com
Small footprint, High quality 20 micro prints, Fantastic Cura software
Limited filament compatibility, Hit and miss with fast print speeds, No heated bed
This smaller version of the Ultimaker 2 features a reduced sized unheated print bed limiting the printer to use with PLA, but for many this sacrifice of materials and print size could be well worth it for the far more compact footprint...
High maximum resolution, Excellent build quality, Easy to maintain and repair
Expensive, Struggles with certain fine details
The Ultimaker 2 has built up quite the reputation in the three years it's been available, and after using one for the better part of a month, we can say with confidence that it definitely lives up to that reputation. The prints are fast, detailed, and...
Publicación: 2015-05-17, Autor: Alastair , crítica de: techradar.com
Ready to use straight from the box, SD card model loading, Fantastic Cura software
Only designed to print PLA and ABS, Care needs to be taken that filament doesn't catch at the back, Not designed for tethered printing
The Ultimaker 2 is easy to set up, and it offers quality prints, ABS and PLA support as well as standalone and quiet operation. All of these factors make this a 3D printer that can ultimately be used easily by anyone....
Publicación: 2014-12-05, Autor: Dong , crítica de: CNET.co.uk
The Ultimaker 2 3D printer has a great compact design, uses standard consumables, and works very quietly. It has a large print platform, and the print plate is removable
The printer performs inconsistently when printing large objects, can't print directly from a computer, and requires manual calibration. It's also very expensive
The Ultimaker 2's convenient and compact design isn't enough to justify its grossly over-the-top price tag....
Elegan, Apple-like design Very-high-quality prints Works with both PLA and ABS filament materials Can print quickly (at low quality)
Expensive Offers only a single extruder
The Ultimaker 2 is a well-built, sophisticated 3D printer that produces high-quality prints in a variety of materials. But it isn't cheap. Who it's for: Artists or engineers who need quick, rough prints and slower, higher-quality prints in both...
Publicación: 2014-12-05, Autor: Dong , crítica de: cnet.com
The Ultimaker 2 3D printer has a great compact design, uses standard consumables, and works very quietly. It has a large print platform, and the print plate is removable
The printer performs inconsistently when printing large objects, can't print directly from a computer, and requires manual calibration. It's also very expensive
The Ultimaker 2's convenient and compact design isn't enough to justify its grossly over-the-top price tag....
Publicación: 2014-06-24, Autor: Tony , crítica de: pcmag.com
High resolution. Consistently good print quality. Reliable. Easy menu navigation. Large build area.
Bottom Line, The Ultimaker 2 offers consistently good print quality, a large build area, and near-flawless operation making it our top 3D printer pick for makers and designers
The Ultimaker 2 offers consistently good print quality, a large build area, and near-flawless operation making it our top 3D printer pick for makers and designers....
Publicación: 2015-05-13, Autor: Alastair , crítica de: techradar.com/au/
Ready to use straight from the box, SD card model loading, Fantastic Cura software
Only designed to print PLA and ABS, Care needs to be taken that filament doesn't catch at the back, Not designed for tethered printing
The Ultimaker 2 is easy to set up, and it offers quality prints, ABS and PLA support as well as standalone and quiet operation. All of these factors make this a 3D printer that can ultimately be used easily by anyone....
¿Le ha sido de ayuda esta crítica?
(80%)
Publicación: 2014-12-06, Autor: Dong , crítica de: cnet.com.au
The Ultimaker 2 3D printer has a great compact design, uses standard consumables, and works very quietly. It has a large print platform, and the print plate is removable
The printer performs inconsistently when printing large objects, can't print directly from a computer, and requires manual calibration. It's also very expensive
The Ultimaker 2's convenient and compact design isn't enough to justify its grossly over-the-top price tag....
