Testseek.es han recogido 34 las revisiones expertas de el XYZprinting da Vinci 1.0 y el grado medio es el 73%. Enrolle abajo y vea todas las revisiones para XYZprinting da Vinci 1.0.
(73%)
34 Críticas
Puntuación media de los expertos que han realizado una crítica del producto.
Usuarios
(65%)
60 Críticas
Puntuación media de los propietarios del producto.
73010034
Críticas
página 1 de 4
Ordenar por:
Puntuación
Publicación: 2016-02-05, Autor: Eric , crítica de: uk.hardware.info
The printers which we tested ranged from around 400 Euros to 2500 Euros, so it's not really fair to compare them to one another. Starting with the cheapest printer which we tested, the XYZPrinting da Vinci Junior 1.0: this is certainly a great little ma...
¿Le ha sido de ayuda esta crítica?
-
Publicación: 2015-11-16, Autor: James , crítica de: Theinquirer.net
Cheap, easy to use, fine print quality, well-designed software
Flimsy case
Even with occasional bad prints, the da Vinci Jr left us seriously impressed. It's a great entry point into 3D printing for hobbyists and small businesses needing to rapidly build parts or prototypes.Indeed, XYZprinting has successfully built a simple but...
Superb ease of use, well-designed software, good print quality for the price
Occasional printing failures, flimsy case
Simple to set up, easy to operate and outstandingly cheap to buy, the da Vinci Jr is the best entry-level 3D printer around. The results aren't always perfect but there's no need to spend more for small models and basic components...
¿Le ha sido de ayuda esta crítica?
(80%)
Publicación: 2015-06-26, Autor: Darien , crítica de: alphr.com
Is this the device that's finally going to bring 3D printing to the mass market? Absolutely not. Like every 3D printer we've seen so far, it's clunky, quirky and nowhere near capable of matching the quality of industrial injection-moulding.It's also limit...
The XYZprinting Da Vinci Jr. 3D Printer is easy to set up and use, requires no calibration and is currently the most inexpensive 3D printer on the market
The printer is relatively bulky considering its small build platform. It uses XYZprinting proprietary consumables and glue may be needed for it to offer a high success rate
The XYZprinting Da Vinci Jr. 3D Printer's low cost and high ease of use make it an ideal entry-level 3D printer for anyone....
Publicación: 2015-02-23, Autor: Alastair , crítica de: techradar.com
Ready to use straight from the box, Fully encased print head and platform, Easy to use and replace cartridge filament
Closed software and hardware system, Only XYZprinting filament can be used, Print quality isn't the best
More suited to an educational environment than a home, the Da Vinci 1.0 is easy to set up and use, but models lack the finish of more expensive printers....
Publicación: 2014-10-31, Autor: Dong , crítica de: CNET.co.uk
The XYZprinting Da Vinci 1.0 AiO 3D Printer works well both as a 3D printer and a 3D scanner. The machine has large print platform, it's ready to use right out of the box, and it's priced much lower than competing devices
The machine uses XYZprinting proprietary consumables, and you can't swap filaments during a print job. Its print-platform is not removable, making it hard to clean
Affordable, reliable, and easy to use, the XYZprinting Da Vinci 1.0 AiO 3D Printer is great leap toward making 3D printing available to the masses....
The XYZprinting Da Vinci Jr. 3D Printer is easy to set up and use, requires no calibration and is currently the most inexpensive 3D printer on the market
The printer is relatively bulky considering its small build platform. It uses XYZprinting proprietary consumables and glue may be needed for it to offer a high success rate
The XYZprinting Da Vinci Jr. 3D Printer's low cost and high ease of use make it an ideal entry-level 3D printer for anyone....
Publicación: 2014-10-31, Autor: Lucas , crítica de: techworld.com
The XYZprinting da Vinci 1.0 AiO is an affordable combination 3D printer and 3D scanner that's as just good as much more expensive models....
¿Le ha sido de ayuda esta crítica?
-
Publicación: 2014-10-31, Autor: Dong , crítica de: cnet.com
The XYZprinting Da Vinci 1.0 AiO 3D Printer works well both as a 3D printer and a 3D scanner. The machine has large print platform, it's ready to use right out of the box, and it's priced much lower than competing devices
The machine uses XYZprinting proprietary consumables, and you can't swap filaments during a print job. Its print-platform is not removable, making it hard to clean
Affordable, reliable, and easy to use, the XYZprinting Da Vinci 1.0 AiO 3D Printer is great leap toward making 3D printing available to the masses....